Our GRP Handrail tube (5mm wall) is available in 5m lengths. 

The outside diameter of the GRP tube is 50mm.

The GRP External Swivel is a versatile in-line swivel fitting, often used where angles vary on slopes, steps and landings.

The GRP 101 Short Tee is a 90° tee connection, typically used in a GRP handrail to connect vertical posts to the top rail, or to join the midrail to the end post. The tube cannot be joined within the top of the fitting - the GRP-104 Long Tee can be used as an alternative if this is required.

The GRP 104 Long Tee is a 90° tee connection, typically used to connect vertical posts to the top rail of a GRP handrail. The GRP-104 can be used where two lengths of tube need to be joined within the top of the fitting.

The GRP 116 Mid Corner is a 90° corner joint, often used in a GRP handrail or guardrail to continue the middle rail on a 90° corner, but can also be used to build rectangular or square structures. The upright passes vertically through the GRP fitting. Often used with the GRP-128 Top Corner.  

The GRP Fitting 119 Midrail Cross is a 90° joint, often used to join the middle rail to an intermediate upright post in a GRP handrail or guardrail. The upright passes vertically through the GRP fitting.

The GRP 125 fitting is a 90° elbow, often used in a GRP handrail or guardrail to connect the top rail to the upright post at the end of a run.

The 128 Top Corner GRP fitting is a 3-way, 90° elbow, typically used to join an upright post to the top rail of a GRP handrail on a 90° corner. Often used with the GRP-116 Mid Corner. 

The GRP 129 is a 30° tee fitting, often used in a staircase GRP handrail or guardrail.

The GRP 130 fitting is a 30° Cross, often used to connect the midrail to intermediate posts in a staircase GRP handrail. 

The GRP 132 Base Plate is a base flange with four fixing holes, used to fix down the upright posts in a handrail or guardrail.

The 145 Wall Socket is a GRP Fitting designed for side fixing GRP handrails or guardrails to walls, ramps and steps.

The GRP 167 Double Swivel is a versatile swivel fitting, used where angles vary on slopes, steps and landings. 

The GRP 173 Single Swivel is a versatile swivel fitting, used where angles vary on slopes, steps and landings. 

We will include the necessary fixing bolts and adhesive in your quotation so you’ve got everything you need to install your GRP handrail securely. 

Our GRP Kickplate is 100mm wide, with a 5mm wall. It is stocked in 6m lengths but can be cut to length if required.